INFRACOM Simultaneous Interpretation System
LKC50 Charging try controller
Description
The IR receivers within the charging tray TK50 can be programmed simultaneously with the LKC50 programming unit and the included software Tray-setup lite. Various parameters may be set in the SW to program the IR receivers. The LKC50 programming unit must be connected between the TK50 and the delivered PSU. Several LKC50 can be cascaded via BNC connection cable to program more than 50 receivers in multiple charging trays at once. The LKC50 programming unit connects to a RS232 serial port of a PC or notebook.
Characteristics of the SW adjustment
Following parameters may be set
- Max Channel
Highest selectable channel number at the IR receiver - Start-up Channel
Channel number to start with - Start-up Volume
Volume to start with - Muting
Selecting the squelch (on / off) - Channel Shift
selecting the channel offset e.g.8 channels - Guard
Selecting the guard (on / off) - Default
Reset all settings to the default (ex factory) values - IR Band Select
selecting the working RF band (Band II / Band IV), if supported by the receiver.
